 |
|
 |
MeritCall ACT Analog Telephone Adapter G11112D
ACT VoIP ATA equipped with 2 ports of 10/100 BaseT that one connect LAN, ADSL or Cable Modem and the other connect to PC. There are 2 RJ-11 ports that allow you to connect to traditional analog phone and PSTN line. You could easily make a phone call or transmit a FAX through VoIP or PSTN.
|
MeritCall ACT ATA G11112D
|
|
| Functions |
| A. |
Place and receive calls
by connecting to regular phone line
|
| B. |
Set ATA by Web or
Regular Phone Upgrade |
| C. |
Hub function: One LAN
port (10 Base-T), One PC port (10 Base-T), One
PHONE port (FXS), One LINE port
(FXO) | | |
| |
| Features
|
| A. |
Protocol :SIP(RFC 3261), MGCP, H.323v2 |
| B. |
Telephone Interfaces:RJ11 interfaces connecting 1 analog phone and 1 PSTN |
| C. |
LAN Interface: 2 ports 10/100 Base-T, RJ45 |
| D. |
Codec: G.711 a-Law/u-Law, G.729A, G.723.1 |
| E. |
In Band/Out Band DTMF(RFC 2833) |
| F. |
Voice Quality: VAD, CNG, AEC(G.168),Jitter Buffering |
|
G. |
Selection Signals: Pulse Dialing 10/20 pps, DTMF Dialing |
| H. |
Tone: DTMF, Ring Tone, 4 selectable tone, Ring Back Tone (local and remote), Dial Ton, Busy Tone, User Define Tone |
| I. |
IP Assignment: DHCP Client /Static IP Address /PPPoE |
|
J. |
FAX Support: G.711 by pass |
| K. |
QoS: ToS |
| L. |
Call Function:
Call Forward (Busy/No answer/Unconditional), Call Hold/Retrieve, Call Transfer (Attended), Call WaitingCaller ID Number Display/ Caller ID Blocking ,Anonymous Call Blocking |
| M. |
Update: Firmware update by TFTP/ Auto Provisioning System (option) |
| N. |
NAT Traversal : UPnP and STUN |
| O. |
PSTN Backup: Power failure, Network failure or service failure, Special number on PSTN dialing table |
| P. |
Configuration : Web Browser, Command Line Interface (Console port, Telnet), Auto Provisioning System | |
|
|
|
|
